!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!
! The DUMPER Utility (from the Fluke Programmer manual)
!
! This program will take the operator input for the begining
! ending memory locations (in hex) then send ASCII formatted
! text out the 232 port to the host computer.
!
! Capture the text on your host computer and save as a text file.
!
! Use the Hex2Bin.EXE (DOS) or Hex2BIN32.EXE (Windows) program
! to covert the ASCII text file to a binary file for your ROM
! burner.  Thanks to Zonn Moore for these utilities!
!
! This utility is handy for dumpping out ROMs that may be soldered
! in the board or otherwise not removable.
!
! NOTE: This is a fairly slow task, a 2532 (4K) file will take a 
! couple of minutes to dump & produce a ~14K text file.
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


Really pretty straight forward.  I forgot to mention that the ~14K text file
is reduced to the proper binary size once again by the conversion utility.

Thanks again to Zonn Moore for the conversion utility!

Kev
mowerman@erols.com
